Impact Window Prices in Oakland Park, FL, by Size and Home Type

    Impact window prices in Oakland Park are set mainly by opening size, window style and how many sliding doors you replace, shown in the verified factory tables below. Every Oakland Park address is in Broward's High-Velocity Hurricane Zone, so products need HVHZ approval. Prices are product-only, before tax, installation, permit and delivery.

    Prices checked November 19, 2026 · WSM factory-pricing Worker v2 (same engine as the online configurator), visitor pricing, product only. Verified product-only prices, before tax, installation, permit and delivery. A written quote confirms your final price.

    Oakland Park projects, priced

    1950s-60s block ranch house

    The 1950s is Oakland Park's biggest building decade. A typical three-bedroom ranch: mid-size bedroom windows, two small bath windows, a living-room roller and one patio slider, all kept at their existing sizes.

    • 6 × Single hung 36" × 48"
    • 2 × Single hung 24" × 36"
    • 1 × Horizontal roller (XO) 72" × 48"
    • 1 × Sliding glass door (XO) 72" × 80"
    ESW total (Verified)
    $8,008.57
    Mr. Glass total (Verified)
    $8,384.70

    Total for all 10 openings · product only, before tax, installation and permit

    1970s house with a Florida room

    About a fifth of Oakland Park homes were built in the 1970s. A larger detached house: taller bedroom windows, a picture window, two rollers on the Florida room and a wider rear slider.

    • 6 × Single hung 36" × 60"
    • 2 × Single hung 24" × 36"
    • 1 × Fixed / picture window 60" × 60"
    • 2 × Horizontal roller (XO) 60" × 48"
    • 1 × Sliding glass door (XO) 96" × 80"
    ESW total (Verified)
    $11,488.36
    Mr. Glass total (Verified)
    $11,625.95

    Total for all 12 openings · product only, before tax, installation and permit

    One unit of a duplex or fourplex

    About 9% of Oakland Park homes are in two- to four-unit buildings. One unit with four bedroom and living windows, a bath window and a kitchen roller, no slider.

    • 4 × Single hung 36" × 48"
    • 1 × Single hung 24" × 36"
    • 1 × Horizontal roller (XO) 48" × 36"
    ESW total (Verified)
    $3,579.75
    Mr. Glass total (Verified)
    $3,697.59

    Total for all 6 openings · product only, before tax, installation and permit

    Condo unit in a 10-plus-unit building

    About a third of Oakland Park homes are in buildings with 10 or more units. A unit with one balcony slider and two bedroom rollers. The association spec sets color and glass, and buildings over 30 feet need engineering.

    • 1 × Sliding glass door (XO) 96" × 80"
    • 2 × Horizontal roller (XO) 60" × 48"
    ESW total (Verified)
    $4,788.18
    Mr. Glass total (Verified)
    $4,937.92

    Total for all 3 openings · product only, before tax, installation and permit

    Unit prices used for Oakland Park

    Per square foot of opening, the sizes priced for Oakland Park run $47 to $61 with ESW and $45 to $73 with Mr. Glass, product only. In these tables, within each window type, a smaller opening costs more per square foot than a larger one, so compare the row closest to your size.

    OpeningESW (Verified)Mr. Glass (Verified)Your exact size
    Single hung
    36" × 48"
    1/8" laminated glass, both brands · ES-MX1000 / MG-350
    $644.09$654.28
    Single hung
    24" × 36"
    1/8" laminated glass, both brands · ES-MX1000 / MG-350
    $368.24$436.72
    Horizontal roller (XO)
    72" × 48"
    1/8" laminated glass, both brands · ES-MX2000 / MG-350
    $1,130.96$1,080.92
    Sliding glass door (XO)
    72" × 80"
    3/16" laminated glass, both brands · ES-MX4000 / MG-1500
    $2,276.59$2,504.66
    Single hung
    36" × 60"
    1/8" laminated glass, both brands · ES-MX1000 / MG-350
    $773.75$761.76
    Fixed / picture window
    60" × 60"
    3/16" laminated glass, both brands · ES-EL150 / MG-400
    $1,321.20$1,244.03
    Horizontal roller (XO)
    60" × 48"
    1/8" laminated glass, both brands · ES-MX2000 / MG-350
    $971.44$938.77
    Sliding glass door (XO)
    96" × 80"
    3/16" laminated glass, both brands · ES-MX4000 / MG-1500
    $2,845.30$3,060.38
    Horizontal roller (XO)
    48" × 36"
    1/8" laminated glass, both brands · ES-MX2000 / MG-350
    $635.15$643.75

    Not your size? Open the ESW or Mr. Glass link on the closest row and change the width and height to see the verified price for your opening.

    The products behind these prices

    Each row compares the lowest-cost line of each brand that has the same laminated glass on both sides, so the price gap is the price gap, not thinner glass on one side.

    TypeESWMr. GlassGlass, both brands
    Single hungES-MX1000 - SINGLE HUNG (OX)
    AAMA 2604 White
    MG-350 Single Hung (EQUAL)
    White
    1/8" laminated clear
    Horizontal roller (XO)ES-MX2000 - HORIZONTAL ROLLER (XO)
    2604 Bone White
    MG-350 Horizontal Roller (XO)
    White
    1/8" laminated clear
    Sliding glass door (XO)ES-MX4000 - SLIDING GLASS DOOR (XO (2))
    AAMA 2604 White
    MG-1500 Sliding Glass Door (heavy) (XO)
    White
    3/16" laminated clear
    Fixed / picture windowES-EL150 - FIXED WINDOW (O)
    AAMA 2604 White
    MG-400 Picture Window (SQUARE)
    White
    3/16" laminated clear

    Start with the house you actually have

    An Oakland Park window budget depends less on the brand than on the building. The city is a mix of mid-century houses, small multi-unit buildings and condo blocks, and each one needs a different set of openings.

    Census estimates for 2020 to 2024 count 19,114 housing units. The table below shows how they split. We used that split to build the price scenarios further down the page.

    Oakland Park homes by building type (US Census ACS 2024 5-year, table B25024)
    Building typeShare of unitsWhat it means for a window order
    Detached single-family houseAbout 42%Full set of bedroom, bath and living-room windows plus a patio slider
    Attached villa or townhouseAbout 7%Fewer openings; association may set color and style
    Duplex, triplex or fourplexAbout 9%Owners often price one unit at a time
    Building with 5 to 9 unitsAbout 7%Low-rise; check roof height before ordering
    Building with 10 or more unitsAbout 33%Balcony sliders dominate; buildings over 30 feet need engineering

    Why mid-century openings shape the price

    Oakland Park's median home was built in 1972. Three decades did most of the building: the 1950s, 1960s and 1970s each produced about a fifth of today's units. Close to nine in ten homes predate 2000.

    For pricing, that means replacing openings sized decades ago, not picking sizes from a catalog. Keeping every opening its current size keeps the job on the city's simpler permit path. Enlarging one usually adds sealed plans and wind calculations to the cost, on top of the bigger unit.

    Verified factory prices for common Oakland Park sizes

    See the tables below. They list ESW and Mr. Glass prices for single-hung windows, horizontal rollers, fixed picture windows and sliding glass doors in common sizes. Each price is marked Verified because it comes from our factory pricing snapshot, checked on November 19, 2026.

    Prices are for the product only, in white with clear laminated glass. They do not include sales tax, installation, permit or delivery. A written quote confirms your final price.

    How to compare the two brands in the tables

    In this snapshot, both brands use the same laminated glass make-up for each window type. Single-hung windows and rollers use two layers of 1/8-inch heat-strengthened glass around a 0.090-inch interlayer. Fixed windows and sliding doors step up to 3/16-inch glass on each side. So for a given size, the price gap between brands is not a glass upgrade.

    That makes the tables a fair side-by-side check. The difference that matters for an Oakland Park permit is the approval record: confirm each product's HVHZ approval covers your size and the pressure your opening needs, corner openings included.

    Which table to use for each Oakland Park opening
    Opening in your homeTable to useNote
    Bedroom or living-room window that opens up and downSingle-hungMost common replacement in mid-century houses
    Small bath windowSingle-hung, 24 x 36Check privacy glass in the written quote
    Wide window that slides sidewaysHorizontal rollerCommon in Florida rooms and condo bedrooms
    Picture window that does not openFixedPriced with thicker glass than operable units
    Patio or balcony doorSliding glass doorUsually the largest single line in a total

    What does a whole Oakland Park home cost? Four examples

    Each scenario below matches one of the building types in the Census table. The page adds up each one from the verified tables, so you can compare brands side by side. Your own count and sizes will move the total, so treat these as a starting point, not a quote.

    What changes the price in Oakland Park?

    • HVHZ approval. Every window and door must carry a Miami-Dade NOA or a Florida Product Approval approved for HVHZ use, covering your exact size and configuration.
    • Corner windows. Broward's wind chart asks for a higher suction rating within a few feet of an outside corner. A corner unit may need a stronger rating than the same size mid-wall.
    • Roof height over 30 feet. The Broward packet the city posts requires site-specific engineering for taller buildings. That fee sits outside the product price.
    • Resized openings. The city's sheet asks for sealed plans and sealed wind calculations when an opening changes size.
    • Sliding doors. A slider is the largest line in most scenarios; one extra door can move a total more than several small windows.
    • Color, grids and tint. Tables show white frames and clear glass. An association spec may call for something else.
    • In stock vs factory order. Standard sizes may be in stock. Custom factory orders take 6–12 weeks depending on brand.

    A quick example: corner zones on a ranch house

    The Broward retrofit packet sets the corner zone at 10% of the house's shortest overall dimension or 0.4 times the mean roof height, whichever is smaller, with a 3-foot minimum. On the packet's 50-foot-wide example house, that is 5 feet from each outside corner.

    In the wind chart printed in the city's permit sheet, a small window at a 15-foot roof height needs a suction rating of 41.0 psf mid-wall and 50.6 psf in the corner zone. When you send measurements, mark which windows sit near a corner so the quote matches the right rating.

    What the Oakland Park price tables leave out

    • Sales tax, delivery and installation
    • Removal and disposal of the old units
    • City of Oakland Park permit fees (the city posts an online Permit Fee Estimator)
    • Engineering for buildings over 30 feet, resized openings or coastal-exposure sites
    • Colors other than white, grids, tint or low-E glass
    • Bucks, mullions and stucco repair around older openings
    • A wind mitigation inspection (form OIR-B1-1802), which can document opening protection for your insurer

    Pricing a condo unit in an Oakland Park building

    About a third of Oakland Park homes sit in buildings with 10 or more units. Before you price anything, ask the association for its window specification in writing. Frame color, glass tint and slider style are often fixed.

    Height matters too. If the building's mean roof height is over 30 feet, the Broward chart cannot be used and an engineer must set each opening's required pressure. Older buildings may also be in Broward's 25-year Building Safety Inspection cycle, so ask whether windows are already on a repair list.

    From price table to permit

    1. Number and measure each opening. List width, height and type, and mark corner openings. Note your mean roof height.
    2. Pick sizes from the tables. Match each opening to the closest table size, then request a written quote for exact dimensions.
    3. Check approvals. Confirm each ESW, Mr. Glass or PGT product's HVHZ approval covers its size and pressure.
    4. File with the city. Oakland Park's Building and Permitting Division, 1100 Park Lane East, takes filings through its CSS online portal with the Broward retrofit schedule.
    5. Inspect and document. After the final inspection, a wind mitigation inspection on form OIR-B1-1802 can record the new protection.

    Questions about an Oakland Park order

    Call (754) 303-7130, or send your numbered list of openings and sizes for a written quote. Include whether you live in a house, a villa or a condo building, and roughly how tall the building is.

    Installation in Oakland Park

    These prices are product only. Installation is quoted separately by Vieser Construction, the company that operates this site.

    Oakland Park price questions

    Are impact windows priced differently in Oakland Park than elsewhere in Broward?

    The table price for a given size and type is the same. What changes is the specification. Every Oakland Park address is in the HVHZ, corner openings may need a higher pressure rating, and buildings over 30 feet need engineering. Those details can change which product line fits.

    Do I need Miami-Dade NOA windows in Oakland Park?

    You need HVHZ-approved products. That means either a Miami-Dade NOA or a Florida Product Approval whose record says it is approved for use in the HVHZ. A Florida approval without HVHZ approval does not qualify in Broward. The approval must cover your exact size and configuration.

    Does making a window bigger add cost in Oakland Park?

    Usually. Besides the larger unit, the city's permit sheet asks for sealed floor plans and sealed wind load calculations for resized or new openings. Keeping existing sizes keeps the job on the simpler path, which suits most of the city's 1950s to 1970s houses.

    How do I price windows for one unit of an Oakland Park duplex?

    Measure only your unit's openings and price them from the tables. About 9% of Oakland Park homes are in two- to four-unit buildings. If the building has an association or shared ownership rules, check them first. The permit still goes through the City of Oakland Park.

    Do Oakland Park prices include the permit?

    No. The tables are product-only, before sales tax, installation, permit and delivery. The City of Oakland Park posts an online Permit Fee Estimator for permit costs. Engineering, where needed, and the wind mitigation inspection are also separate.

    How long does a factory order take for an Oakland Park home?

    Custom factory orders typically take 6–12 weeks depending on brand. Standard sizes may be in stock, which can shorten the wait. Plan review by the city and any association approval add time, so start the paperwork while you compare prices.

    Sources

    Price your Oakland Park openings

    Enter your sizes for an instant factory price, or send them for a written quote.

    We use optional cookies for analytics and advertising. They are not needed to browse or buy. Privacy