Impact Window Prices for Galt Ocean Mile, Fort Lauderdale Condos

    Impact window prices for a Galt Ocean Mile condo depend mostly on the sliders: a unit's balcony doors usually cost more than all its windows combined. See the verified ESW and Mr. Glass tables and the three unit scenarios below. Prices are product-only, before tax, installation, permit, engineering and delivery; a written quote confirms the final price.

    Prices checked November 19, 2026 · WSM factory-pricing Worker v2 (same engine as the online configurator), visitor pricing, product only. Verified product-only prices, before tax, installation, permit and delivery. A written quote confirms your final price.

    Galt Ocean Mile projects, priced

    1-bedroom unit, one balcony slider

    A typical one-bedroom in a 1960s or 1970s Galt Ocean Mile tower: one two-panel slider from the living room to the balcony, a wide roller in the bedroom and a smaller roller in the kitchen.

    • 1 × Sliding glass door (XO) 72" × 80"
    • 1 × Horizontal roller (XO) 60" × 48"
    • 1 × Horizontal roller (XO) 48" × 36"
    ESW total (Verified)
    $3,883.18
    Mr. Glass total (Verified)
    $4,087.18

    Total for all 3 openings · product only, before tax, installation and permit

    2-bedroom unit with a 120x80 four-panel slider

    A two-bedroom with a wide balcony: a four-panel 120x80 slider across the living room, a large roller in each bedroom, a kitchen roller and a small fixed bath window.

    • 1 × Sliding glass door, 4 panels (OX-XO) 120" × 80"
    • 2 × Horizontal roller (XO) 72" × 48"
    • 1 × Horizontal roller (XO) 48" × 36"
    • 1 × Fixed / picture window 36" × 36"
    ESW total (Verified)
    $7,360.92
    Mr. Glass total (Verified)
    $7,653.94

    Total for all 5 openings · product only, before tax, installation and permit

    Corner 3-bedroom unit with three sliders

    A corner unit with glass on two faces: a four-panel 120x80 slider in the living room, two-panel sliders from the primary and second bedrooms, two fixed view windows on the side wall, and rollers in the third bedroom and kitchen. Engineer-set pressures for corner openings are not in this total.

    • 1 × Sliding glass door, 4 panels (OX-XO) 120" × 80"
    • 2 × Sliding glass door (XO) 96" × 80"
    • 2 × Fixed / picture window 72" × 48"
    • 1 × Horizontal roller (XO) 72" × 48"
    • 1 × Horizontal roller (XO) 48" × 36"
    ESW total (Verified)
    $13,952.79
    Mr. Glass total (Verified)
    $14,569.78

    Total for all 7 openings · product only, before tax, installation and permit

    Unit prices used for Galt Ocean Mile

    Per square foot of opening, the sizes priced for Galt Ocean Mile run $47 to $59 with ESW and $45 to $65 with Mr. Glass, product only. In these tables, within each window type, a smaller opening costs more per square foot than a larger one, so compare the row closest to your size.

    OpeningESW (Verified)Mr. Glass (Verified)Your exact size
    Sliding glass door (XO)
    72" × 80"
    3/16" laminated glass, both brands · ES-MX4000 / MG-1500
    $2,276.59$2,504.66
    Horizontal roller (XO)
    60" × 48"
    1/8" laminated glass, both brands · ES-MX2000 / MG-350
    $971.44$938.77
    Horizontal roller (XO)
    48" × 36"
    1/8" laminated glass, both brands · ES-MX2000 / MG-350
    $635.15$643.75
    Sliding glass door, 4 panels (OX-XO)
    120" × 80"
    3/16" laminated glass, both brands · ES-MX4000 / MG-1500
    $3,945.22$4,302.63
    Horizontal roller (XO)
    72" × 48"
    1/8" laminated glass, both brands · ES-MX2000 / MG-350
    $1,130.96$1,080.92
    Fixed / picture window
    36" × 36"
    3/16" laminated glass, both brands · ES-EL150 / MG-400
    $518.63$545.72
    Sliding glass door (XO)
    96" × 80"
    3/16" laminated glass, both brands · ES-MX4000 / MG-1500
    $2,845.30$3,060.38
    Fixed / picture window
    72" × 48"
    3/16" laminated glass, both brands · ES-EL150 / MG-400
    $1,275.43$1,210.86

    Not your size? Open the ESW or Mr. Glass link on the closest row and change the width and height to see the verified price for your opening.

    The products behind these prices

    Each row compares the lowest-cost line of each brand that has the same laminated glass on both sides, so the price gap is the price gap, not thinner glass on one side.

    TypeESWMr. GlassGlass, both brands
    Sliding glass door (XO)ES-MX4000 - SLIDING GLASS DOOR (XO (2))
    AAMA 2604 White
    MG-1500 Sliding Glass Door (heavy) (XO)
    White
    3/16" laminated clear
    Horizontal roller (XO)ES-MX2000 - HORIZONTAL ROLLER (XO)
    2604 Bone White
    MG-350 Horizontal Roller (XO)
    White
    1/8" laminated clear
    Sliding glass door, 4 panels (OX-XO)ES-MX4000 - SLIDING GLASS DOOR (OX-XO (2))
    AAMA 2604 White
    MG-1500 Sliding Glass Door (heavy) (OXXO)
    White
    3/16" laminated clear
    Fixed / picture windowES-EL150 - FIXED WINDOW (O)
    AAMA 2604 White
    MG-400 Picture Window (SQUARE)
    White
    3/16" laminated clear

    Why Galt Ocean Mile is priced by the unit, not the house

    Galt Ocean Mile is a row of condo and co-op towers on the barrier island in Fort Lauderdale. The City of Fort Lauderdale issues the window permits here, and every tower parcel we checked carries the city's RMH-60 high-rise zoning. So the useful question is what one unit costs, not one house.

    Most of the buildings are old enough that their original openings were never impact-rated. The Broward County Property Appraiser lists 15 of the 17 buildings we sampled as built between 1957 and 1975. Unit sizes run from small efficiencies to corner units of more than 2,400 square feet, so the opening count changes a lot from one door to the next.

    That is why this page prices three real unit types. Each one starts with sliders, because on an oceanfront tower the glass doors to the balcony are the biggest line on the quote.

    What we found in Property Appraiser records for sampled Galt Ocean Mile buildings (checked 2026-11-18)
    MeasureWhat the records showWhy it matters for price
    Year built15 of 17 sampled buildings from 1957 to 1975; two from 1997 and 1998Original openings in older towers usually need full replacement
    ZoningRMH-60, Residential Multifamily High Rise/High DensityTall buildings need engineer-set pressures, outside the tables
    Unit sizeFrom about 310 sq ft efficiencies to units over 2,400 sq ftOpening count and slider width vary widely
    OwnershipCondominiums, plus at least one cooperativeAssociation rules decide who orders and who pays

    Verified factory prices for condo-size openings

    See the tables below. They show ESW and Mr. Glass prices for horizontal rollers, fixed picture windows, single-hungs and sliding glass doors, including the four-panel 120x80 slider found on many wide balconies. Each price is labeled Verified because it comes from our factory pricing snapshot, checked on November 19, 2026.

    Prices are for the product only, in white with clear laminated impact glass. They do not include sales tax, installation, the city permit, engineering or delivery. Ask for the glass build on your written quote, and the quote confirms your final price.

    Three Galt Ocean Mile units, added up from the tables

    Each scenario below uses only sizes from the verified tables. The page totals each unit for both brands. Your building's real openings may differ, so measure yours, swap in your counts and then ask for a written quote.

    The corner unit costs the most for a simple reason. It has glass on two faces of the building, and it usually has more than one slider.

    How much of a condo price is the slider?

    Usually most of it. Compare the slider lines with the window lines in each scenario and you will see the pattern. A two-panel 96x80 door, or a four-panel 120x80 door, can outweigh every window in a one- or two-bedroom unit.

    So before you compare quotes, confirm the slider. Count the panels, measure the full opening, and note whether it opens from the center or one side. A four-panel slider is a different product from two two-panel doors, and it is priced that way in the tables.

    Windows matter less, but size still counts. The roller table climbs quickly from 48x36 to 72x48. And do not assume a fixed view window is the cheaper pick: at 72x48, the fixed unit in the table prices above the roller of the same size for both brands. Compare line by line before you choose.

    Who pays: you or the association?

    Check this before you budget. Florida Statute 718.113(5) requires each condo board to adopt hurricane protection specifications for each building. The specs can set color and style, so they can rule out the white frames priced in the tables. The board may not refuse an owner's installation that meets the specs.

    Florida Statute 718.115 then splits the bill. If the declaration or an owner vote makes owners responsible, the association charges each owner for the protection on that owner's unit, and it is not a common expense. If you already installed code-compliant protection and the association later installs the same type on other units, you are excused or credited. You still pay a share for protection on lobbies, halls and other common areas.

    Also ask for the window line in your building's structural integrity reserve study. Florida Statute 718.112 requires that study to cover windows and exterior doors, so it shows whether the association plans to replace openings itself.

    Co-op owners should check a different rule book. At least one Galt Ocean Mile building, Edgewater Arms at 3600 Galt Ocean Drive, is listed by the Property Appraiser as a cooperative, not a condominium. The condo statutes above are written for condominiums, so a co-op shareholder should read the co-op's own documents and ask the board who orders and who pays before using any total on this page as a budget.

    Why a high floor facing the ocean can cost more

    Broward's design wind speed is 170 mph for typical residential buildings. On the beach, the code adds two things that raise the pressure a window must meet. Inside the High-Velocity Hurricane Zone, every building is treated as at least Exposure C, and Exposure D applies where open water runs upwind. Pressure also rises with height.

    The city's window checklist allows chart pressures only for buildings under three stories. Above that, the designer of record supplies the pressure for each opening. Corner strips of a wall carry higher suction than the middle, so a corner unit near the top of a tower may need a higher-rated slider or window than the table item. When that happens, the quote changes, and the engineering is a separate line.

    • Standard rating meets your pressure: the table price applies.
    • Pressure is higher than the standard rating: ask for the higher-rated option, priced on the quote.
    • Every tower job: sealed pressures from an engineer or architect, quoted separately.

    Permit lines a condo quote should show

    The permit is not in the tables, but plan for it. Fort Lauderdale's quick walk-thru permit for exact window and door replacement is listed only for single-family homes, duplexes and townhouses. A condo unit is filed through the city's LauderBuild portal for standard review, with Building and Flood review stops on the city checklist.

    Each product needs a Miami-Dade Notice of Acceptance, and the openings go on the Broward County Uniform Retrofit Window and Door Schedule. A recorded Notice of Commencement is required when the job is over the city's threshold. Ask for permit, engineering and Notice of Commencement as their own quote lines.

    What the Galt Ocean Mile tables leave out

    • Florida sales tax and delivery to the tower
    • Installation, removal of old units and disposal
    • City of Fort Lauderdale permit fees
    • Engineer- or architect-sealed design pressures for the building
    • Frame colors, tints or glass required by your board's hurricane specs
    • Higher-rated options for corner or upper-floor openings
    • Wind mitigation inspection on form OIR-B1-1802, which can document opening protection for your insurer

    Stock sizes and factory orders

    Standard sizes may be in stock. Custom factory orders take 6–12 weeks depending on brand. In a tower, the board's approval and the engineer's pressures usually come first, so start those while you compare prices.

    Call (754) 303-7130 or send your unit's opening list for a written quote.

    1. Get the board's specs. Ask for the 718.113(5) hurricane specifications and any alteration form.
    2. List every opening. Width, height, type and panel count for each window and slider, and which walls face the ocean.
    3. Pick the closest scenario. Start from the 1-bedroom, 2-bedroom or corner 3-bedroom total, then adjust counts.
    4. Ask for a written quote. It should list each product, its NOA, the glass build, and separate lines for permit and engineering.

    Installation in Galt Ocean Mile

    These prices are product only. Installation is quoted separately by Vieser Construction, the company that operates this site.

    Galt Ocean Mile price questions

    What do impact windows cost for a 1-bedroom Galt Ocean Mile condo?

    See the 1-bedroom scenario on this page. It totals one two-panel slider and two rollers for both ESW and Mr. Glass from the verified tables. Prices are product-only. Installation, tax, delivery, the City of Fort Lauderdale permit and engineering are quoted separately.

    How much is a 120x80 sliding door for a Galt Ocean Mile balcony?

    The four-panel 120x80 slider is in the verified sliding door table, with prices for both brands. It is the largest item in the 2-bedroom and corner 3-bedroom scenarios. If your tower's engineer sets a higher pressure than the standard rating, the quote may use a higher-rated option.

    Does my condo association pay for impact windows?

    It depends on your declaration. Under Florida Statute 718.115, if owners are responsible, the association charges each owner for their own unit. If you already installed code-compliant protection and the association later installs the same type, you are excused or credited. Ask your board in writing.

    Why does a corner unit on Galt Ocean Mile cost more?

    It has glass on two faces and often two or three sliders, so the count is higher. Corner strips of a wall also carry higher suction, and on high floors near the ocean the engineer's pressure can call for a higher-rated product. Both show up in the corner scenario and the quote.

    Can my board require a certain frame color?

    Yes. Florida Statute 718.113(5) lets the board's hurricane specifications set color and style. The tables price white frames with clear laminated glass, so get the spec sheet first. A different color or tint is priced on your written quote.

    How long does a factory order take for a Galt Ocean Mile unit?

    Standard sizes may be in stock. Custom factory orders take 6–12 weeks depending on brand. In a tower, the board's approval, the engineer's pressures and the LauderBuild permit review also take time, so start them early.

    Sources

    Price your Galt Ocean Mile openings

    Enter your sizes for an instant factory price, or send them for a written quote.

    We use optional cookies for analytics and advertising. They are not needed to browse or buy. Privacy