What Impact Windows Cost in Delray Beach, FL
Impact window prices in Delray Beach depend mostly on opening size, window type and door count, shown in the verified factory tables below. Delray Beach is outside the High-Velocity Hurricane Zone, so Florida Product Approval products qualify, but design wind speeds near the beach approach 170 mph. Prices are product-only, before tax, installation, permit and delivery.
Prices checked October 20, 2026 · WSM factory-pricing Worker v2 (same engine as the online configurator), visitor pricing, product only. Verified product-only prices, before tax, installation, permit and delivery. A written quote confirms your final price.
Delray Beach projects, priced
1970s-80s single-family home
The 1970s and 1980s were Delray Beach's biggest building decades. A typical house of that era west of the Intracoastal: tall bedroom windows, small bath windows, a living-room roller and one patio slider.
- 7 × Single hung 36" × 60"
- 2 × Single hung 24" × 36"
- 1 × Horizontal roller (XO) 72" × 48"
- 1 × Sliding glass door (XO) 96" × 80"
- ESW (Verified)
- $12,682.96
- Mr. Glass (Verified)
- $13,118.85
11 openings · product only
Attached villa or townhome
About 13% of Delray Beach homes are single-family attached. Fewer openings, usually one rear slider. Check the association's window spec before ordering.
- 5 × Single hung 36" × 48"
- 1 × Single hung 24" × 36"
- 1 × Sliding glass door (XO) 72" × 80"
- ESW (Verified)
- $7,394.80
- Mr. Glass (Verified)
- $8,105.50
7 openings · product only
Condo unit in a larger building
About 30% of Delray Beach homes are in buildings with 10 or more units. A unit with a wide balcony slider, a second slider and two roller windows. The association spec sets color and glass.
- 1 × Sliding glass door (XO) 120" × 80"
- 1 × Sliding glass door (XO) 72" × 80"
- 2 × Horizontal roller (XO) 60" × 36"
- ESW (Verified)
- $10,805.52
- Mr. Glass (Verified)
- $10,358.76
4 openings · product only
Historic-district house (before COA changes)
A smaller older home in a district like Del-Ida Park or Old School Square, mostly single-hung windows and a front picture window. Priced in white with clear glass; a required color or muntins will change it.
- 6 × Single hung 36" × 60"
- 2 × Single hung 24" × 36"
- 1 × Fixed / picture window 48" × 48"
- ESW (Verified)
- $6,878.49
- Mr. Glass (Verified)
- $7,487.56
9 openings · product only
Unit prices used for Delray Beach
| Type | Size | ESW (Verified) | Mr. Glass (Verified) |
|---|---|---|---|
| Single hung | 36" × 60" | $851.13 | $926.62 |
| Single hung | 24" × 36" | $405.06 | $534.23 |
| Horizontal roller (XO) | 72" × 48" | $1,633.87 | $1,314.03 |
| Sliding glass door (XO) | 96" × 80" | $4,281.06 | $4,250.02 |
| Single hung | 36" × 48" | $708.50 | $796.40 |
| Sliding glass door (XO) | 72" × 80" | $3,447.24 | $3,589.27 |
| Sliding glass door (XO) | 120" × 80" | $5,114.86 | $4,910.77 |
| Horizontal roller (XO) | 60" × 36" | $1,121.71 | $929.36 |
| Fixed / picture window | 48" × 48" | $961.59 | $859.38 |
Why a Delray Beach price starts with a 1984 house near 170 mph
Two local facts shape almost every Delray Beach window budget. The first is age. The Census puts the median Delray Beach home at 1984, and about 78% of units were built before 2000. Most homes went up before the statewide Florida Building Code took effect in 2002, with its wind-borne debris rules.
The second is wind. Delray Beach is not in the High-Velocity Hurricane Zone, which the code limits to Miami-Dade and Broward. But all of Palm Beach County is in the wind-borne debris region, so replaced windows and doors need impact-rated glass or approved shutters.
Palm Beach County's posted wind map says to use 170 mph for the eastern coastal strip, which includes Delray Beach. On the statewide map behind the current code, the city falls between the 160 and 170 mph lines. Your exact number comes from the county's parcel wind-speed tool.
| Measure | Delray Beach figure | What it means for your quote |
|---|---|---|
| Median year built | 1984 | Most original windows predate today's impact rules |
| Built before 1990 | About 65% of units | Openings often sized for older single-hung and roller units |
| Built before 2000 | About 78% of units | Most homes predate the 2002 statewide code |
| Biggest decades | 1970s and 1980s | The scenarios below are built around these homes |
Verified factory prices for Delray Beach window sizes
See the tables below. They show ESW and Mr. Glass prices for single-hung windows, horizontal rollers, fixed picture windows and sliding glass doors in common sizes. Every price is labeled Verified because it comes from our factory pricing snapshot, checked on October 20, 2026.
Prices are for the product only, in white with clear laminated glass, before sales tax, installation, permit and delivery. A written quote confirms your final price.
For single-hung and roller windows, both brands use the same glass make-up. For fixed windows and sliding doors the glass differs, so that comparison is not exactly equal.
Four Delray Beach projects, priced from the tables
Delray Beach is a mixed city. About 38% of homes are single-family detached, about 13% are attached villas and townhomes, and about 30% are in buildings with 10 or more units. The scenarios below match those home types, and the page adds up each one from the verified tables. Your own count and sizes will move the total.
What changes the price in Delray Beach
- No HVHZ requirement. Outside the HVHZ, a product with a Florida Product Approval (FL number) qualifies; you do not need a Miami-Dade NOA. The approval must cover your size and configuration.
- Distance from the ocean. Homes near the beach sit closest to the 170 mph line. Higher design wind speed can call for higher design-pressure ratings on large openings.
- Opening size. Price climbs with size in every table.
- Window type. A roller and a fixed window of similar area are priced differently.
- Glass. The tables price clear laminated glass. In historic districts, the city's board has limited reflective and low-e glass on approved jobs.
- Sliding doors. Sliders are the largest line in each scenario. One extra door often moves a total more than several small windows.
- Color and muntins. The tables show white frames with no grids. A historic approval or condo spec may require something else.
- In stock vs factory order. Standard sizes may be in stock. Custom factory orders take 4–8 weeks.
Historic districts and condo buildings change the spec, and the price
Delray Beach has five locally designated historic districts: Old School Square, Del-Ida Park, West Settlers, Nassau Park and Marina. In these districts, replacing windows or doors needs a Certificate of Appropriateness from the Historic Preservation Board or city staff, plus a permit acknowledgement form with a windows section. Reviewers look at trim, material, frame size and shape, and color.
The board means it. It approved new windows at 321 NW First Avenue in Old School Square with limits on reflective and low-e glass. In another case, it set conditions after installed windows came in white, without the navy frames and muntins that were approved. Price the approved spec, not the white standard in our tables.
Condo owners face a different trigger. Under Florida Statute 553.899, Delray Beach condo and co-op buildings of three or more stories need a milestone inspection by December 31 of the year they turn 30, or 25 if within 3 miles of the coastline. Repairs need city permits. Ask your association for its window spec first.
Beach, Intracoastal or west of I-95: why your location matters
Delray Beach has about 3 miles of Atlantic beachfront, with the Intracoastal Waterway between the barrier island and downtown. The city warns that its coastal geography makes it vulnerable to tidal flooding, storm surge and heavy rain. Check your zone on the FEMA Flood Map Service Center.
| Area | Flood zone | Base flood elevation |
|---|---|---|
| Oceanfront | VE (coastal high hazard, wave action) | 12 ft at sampled beach points |
| Along the Intracoastal | AE (coastal floodplain) | 8 ft at sampled lots |
| Downtown and west of I-95 | X (minimal flood hazard) | Not applicable |
What the Delray Beach price tables do not include
- Sales tax, delivery and installation
- Removal and disposal of old windows
- City of Delray Beach permit fees and any engineering
- Colors other than white, grids, tinted or low-e glass
- Bucks, mullions and stucco or trim repair
- Wind mitigation inspection (form OIR-B1-1802), which can document opening protection for your insurer
From price table to permit in Delray Beach
- Measure every opening. List the width, height and type of each window and door, and note which face the ocean or Intracoastal.
- Look up wind speed and flood zone. Use Palm Beach County's parcel wind-speed tool and the FEMA Flood Map Service Center.
- Check historic or association rules. In a historic district, plan for a Certificate of Appropriateness first. Condo and villa owners should get the association's window spec.
- Match approved products. Pick ESW, Mr. Glass or PGT products whose Florida Product Approval covers each size and design pressure.
- File on Delray Beach eServices. The Building Division takes permits online through eServices, which replaced ePlans in June 2025. Window jobs are not on the city's three-day express list, so allow for review.
- Notice of Commencement, install, inspect. Florida law requires a recorded Notice of Commencement on file before the first inspection when the contract is above the state threshold. Request inspections through eServices, then get a wind mitigation inspection on form OIR-B1-1802.
Why Delray Beach owners stop relying on shutters
Delray Beach has taken direct or near-direct hurricane hits in 1928, 1947, 1949, 1964, 1965, 1979, 1992, 1999, 2004 and 2005, among others. After Wilma in 2005, a Florida DEP report said south-county Delray Beach and Boynton Beach saw more extensive wind damage than the rest of the county.
Shutters also have to come down. Delray Beach Fire Rescue urges removing them as soon as a storm passes, because closed shutters trap smoke and heat. Impact glass stays in place.
Questions? Call (754) 303-7130 or send your list of openings for a written quote.
In stock now for Delray Beach
Real units available for pickup in South Florida — reserve online, no payment required.
- Mr Glass Horizontal Roller 35 3/4" × 47 3/4"$561.75
- Mr Glass Horizontal Roller 26 1/4" × 38 1/8"$464.38
- Mr Glass Single Hung 26 1/4" × 38 1/8"$404.46
- Mr Glass Horizontal Roller 106" × 50 5/8"$1,318.24
Delray Beach price questions
Do I need Miami-Dade NOA windows in Delray Beach?
No. Delray Beach is in Palm Beach County, outside the High-Velocity Hurricane Zone, so products with a Florida Product Approval qualify. A Miami-Dade NOA is a local approval mainly used in the HVHZ. What matters is that the approval covers your exact window size, configuration and the design pressure at your Delray Beach address.
Is a beachside home in 33483 priced differently than a home west of I-95?
The table price for the same size and type does not change by ZIP code. The spec can. Homes near the beach sit closest to the 170 mph wind line, which can call for higher design-pressure ratings on large openings. Oceanfront lots are also mapped in FEMA Zone VE, while sampled points west of I-95 are Zone X.
Does a Delray Beach historic district home cost more?
It can. In Old School Square, Del-Ida Park, West Settlers, Nassau Park and Marina, window replacement needs a Certificate of Appropriateness. Reviewers check color, size, trim and glass, and the board has limited reflective and low-e glass. Our tables price white frames with clear glass, so a required color or muntin pattern changes the number.
Does a Delray Beach window permit come out in three days?
No. Delray Beach's three-day express permits cover only A/C change-outs, water heater replacements and re-roofs. Window and door replacement goes through regular review on Delray Beach eServices, the online system that replaced ePlans in June 2025. In a historic district, the Certificate of Appropriateness comes first.
My Delray Beach condo building is facing milestone inspection. Should I wait to price windows?
Get the association's window spec first. Under Florida Statute 553.899, Delray Beach buildings of three or more stories need a milestone inspection by the end of the year they turn 30, or 25 within 3 miles of the coast. Repairs need city permits, and the association's rules may set color, glass and frame style.
How long does a factory order take for a Delray Beach home?
Custom factory orders typically take 4–8 weeks. Standard sizes may be in stock, which can shorten the wait. Either way, add time for plan review on eServices and, in a historic district, the Certificate of Appropriateness. A written quote lists what is in stock for your sizes.
Sources
- Engineering Express - What is the HVHZ (FBC Section 202)
- Palm Beach County PZB - Ultimate Design Wind Speed Map, Risk Category II
- Palm Beach County PZB - Wind Speed Maps and GIS tools
- FBC 8th Ed. Figure 1609.3(1) wind contours (ASCE 7-22) ArcGIS layer
- Engineering Express - Florida Product Approval vs Miami-Dade NOA
- US Census ACS 2024 1-year, Year Structure Built (B25034)
- US Census ACS 2024 1-year, Units in Structure (B25024)
- City of Delray Beach - Delray Beach eServices portal
- City of Delray Beach - Building Permit Applications
- Florida Statutes s.713.135 (Notice of Commencement)
- City of Delray Beach - Historic Preservation FAQ
- City of Delray Beach - Historic Preservation Building Permit Acknowledgement Form
- CitizenPortal.ai - Delray Beach HPB window approval summary
- City of Delray Beach - Milestone Recertification of Condominium and Cooperative Buildings
- FEMA National Flood Hazard Layer
- City of Delray Beach - Flood Information for Low-Lying Areas
- Wikipedia - Delray Beach, Florida
- Wikipedia - Effects of Hurricane Wilma in Florida
- WPTV - Delray Beach Fire Rescue on removing hurricane shutters
Price your Delray Beach openings
Enter your sizes for an instant factory price, or send them for a written quote.